1x4 mems optical switch

The Fiberer's 1x4 switch is a very fast opto-mechanical switch based on the latest silicon MEMS technology and uses micro-mechanical mirrors to redirect the light. The switch is built by cascading 1x2 switches which are qualified according to Telcordia GR1221.
Features	Applications
High reliabilit Low insertion loss TTL or CMOS drive Latching or non-latching	Optical Reconfiguration Instrumentation WDM

Spec and Parameter-Single-mode

Parameter	Value
Wavelength range	1240~1640nm
Insertion loss	typ.0.7dB,max 1.2dB
Return loss	>=50 dB
Polarization dependent loss	<0.1dB
Cross talk	Typ.75dB, Max 60dB
Repeatabilit	<=0.002dB
Switch speed	<0.5ms, max 1ms
Durabilit	no wear out
Operating Voltage	<5 VDC
Power Consumption	typ 10mW, max 50mW
Operation temperature	0~70 C
Storage temperature	-40~85
Size (L x W x H)	80 x 50 x 9.5mm

Spec and Parameter-Multi-mode

Parameter	Value
Wavelength range	600~1700nm
Insertion loss	typ.1.0dB,max 2.0dB
Return loss	>=35 dB
Polarization dependent loss	<0.1dB
Cross talk	Typ.60dB, Max 45dB
Repeatabilit	<=0.002dB
Switch speed	<5ms, max 10ms
Durabilit	>1billion
Fiber type	62.5/125/900, 50/125/900
Operating Voltage	<5 VDC
Power Consumption	typ 10mW, max 50mW
Operation temperature	0~70 C
Storage temperature	-40~85C
Size (L x W x H)	70 x 50 x 9.5mm

Pictures

Latching Type

Non-latching Type

Information of Order to Provide
MSW	Switch channel	Latching or Non-Latching	Fiber Type	Fiber Length	Connector
	14=1x4 18=1x8 110=1x10 112=1x12 113=1x13 116=1x16	L=Latching N=Non-Latching	S9=SMF 900um M5=MMF 50/125/900um M6=MMF 62.5/125/900um	1=1.0m 2=2.0m	NE=None FA=FC/APC FC=FC/PC SA=SC/APC SC=SC/PC ST=ST/PC LA=LC/APC LC=LC/PC XX=others